|
Category: Main › Engines, Powertrain, & Parts › Parts
 |
Title |
Price
|
Date
|
|
| |
1963 46' Chris Craft Two 1 3/8 stainless steel shafts 13'9",two bronze rudders,two 23"19-10 props,one IDEAL windless,one anchor light with horns,four air intakes,two running lights,one 12 volt one mile range spot light,two 431 linclon engines, one 7.5 kw ONAN two...
|
$ 2,000 for all USD |
6/15/10 |
| |
K Engine Parts -Used Rochester carbs (3) for KBL Cam, crank, head, valves, manifold, covers, oil pump, other parts. Call 765-318-6775 or email bonnie@mjestell.com for information and offer a price. Great deal for an engine guy. I can email pictures if needed. These...
|
$ 0 USD |
2/25/10 |
| |
|
$ 500 ea USD |
7/7/09 |
 |
1957~312~Ford~ Y-Block Interceptor Marine Drive Parts Offering in a package, or individual parts or pieces is this mid fifties Ford Y Block 312 Interceptor Marine Drive.... Engine was last started aprox. 5/2?/2009. What I believe to be a Dearborn Marine Transmission, went smoothly from forward to...
|
$ 10 USD |
6/23/09 |
| |
Reproduction Parts Reproduction parts for Chris-Craft, Dodge, Gar Wood & Hacker runabouts & utilities. Authentic best-of-show quality hardware since 1979. View catalog at www.californiaclassicboats.com. Printed catalog $6 (refundable with $50 order). Al Schinnerer, ...
|
$ 0 USD |
12/19/07 |
| |
2 Bronze Shafts 2 Bronze Shafts out of our 1968 Chris Craft, they are 1 3/8 in diameter shafts and are 11" 3'. 11 feet 3 inches long. And are in excellent condition. $200.00
|
$ 200.00 USD |
8/23/07 |
| |
New Scripps Heads & Gaskets Aluminum 356 T-6 alloy with stainless steel thread inserts Early and late style for 150 series 6-cyl and 300 series 12-cyl. Fully machined $800.00 each or $750.00 each for three or more. New copper head gaskets $75.00 each or $70 each for three or...
|
$ 800 each Three or more each USD |
5/8/07 |
|
|
|
|
|
Title |
Price
|
Date
|
|
| |
1963 46' Chris Craft Two 1 3/8 stainless steel shafts 13'9",two bronze rudders,two 23"19-10 props,one IDEAL windless,one anchor light with horns,four air intakes,two running lights,one 12 volt one mile range spot light,two 431 linclon engines, one 7.5 kw ONAN two...
|
$ 2,000 for all USD |
6/15/10 |
|
1957~312~Ford~ Y-Block Interceptor Marine Drive Parts Offering in a package, or individual parts or pieces is this mid fifties Ford Y Block 312 Interceptor Marine Drive.... Engine was last started aprox. 5/2?/2009. What I believe to be a Dearborn Marine Transmission, went smoothly from forward to...
|
$ 10 USD |
6/23/09 |
| |
Reproduction Parts Reproduction parts for Chris-Craft, Dodge, Gar Wood & Hacker runabouts & utilities. Authentic best-of-show quality hardware since 1979. View catalog at www.californiaclassicboats.com. Printed catalog $6 (refundable with $50 order). Al Schinnerer, ...
|
$ 0 USD |
12/19/07 |
| |
2 Bronze Shafts 2 Bronze Shafts out of our 1968 Chris Craft, they are 1 3/8 in diameter shafts and are 11" 3'. 11 feet 3 inches long. And are in excellent condition. $200.00
|
$ 200.00 USD |
8/23/07 |
| |
New Scripps Heads & Gaskets Aluminum 356 T-6 alloy with stainless steel thread inserts Early and late style for 150 series 6-cyl and 300 series 12-cyl. Fully machined $800.00 each or $750.00 each for three or more. New copper head gaskets $75.00 each or $70 each for three or...
|
$ 800 each Three or more each USD |
5/8/07 |
| |
K Engine Parts -Used Rochester carbs (3) for KBL Cam, crank, head, valves, manifold, covers, oil pump, other parts. Call 765-318-6775 or email bonnie@mjestell.com for information and offer a price. Great deal for an engine guy. I can email pictures if needed. These...
|
$ 0 USD |
2/25/10 |
|
Horn Ring This is a horn ring with for a Century Coronado that fits a 4 spoke wheel and was used in the late 50's and early 60's. The ring has no cracks or bends. The chrome is good with minor pitting.
Call 386-785-8911
|
$ 150 USD |
2/22/10 |
| |
Prop Shafts Prop Shafts, Brand New & Never Used, Stainless Steel 1.5" diameter, one end threaded. Five available at 6 feet long, one at 12 feet and one at 18 feet. These shafts can be cut to the proper length for your boat. These were made as spares for a 52'...
|
$ 400 USD |
11/5/09 |
| |
Boat Engine Ignition Parts - CDI Electronics CDI Marine Electronics introduce replacement ignition for your Mercury, OMC (Johnson/Evinrude), Yamaha & Chrysler/Force.
# The leader in marine electronic ignition technology for outboard motor. Their products are re-engineered to meet rigorous...
|
$ 0 Featured USD |
10/27/09 |
|
Salvage rights to early 60s Commander Parting classic wooden 32' Chris Craft Commander (?). Boat was last registered in 2000, we know little detail from there other than it was left on a foreclosed propery and we were contracted to remove and dispose of her. A valve cover on the port...
|
$ 500 USD |
9/10/09 |
|
|
$ 1 USD |
9/6/09 |
| |
Chris Craft Props for Lg Cruiser I have a set of props (Chris Craft number 1864/1865). These are Original CC props off of a 1952 47ft Buccaneer. They are in great shape and just need a cleaning. Cost of replacements are $1,000 each. Asking $1000 for the set. Email...
|
$ 1,000 USD |
9/5/09 |
| |
Chris Craft 283 Parts 2 sets: end housings, exhaust manifolds, low profile aluminum intake manifolds, water pumps, distributors, solid lifter camshafts & lifters (S&O), water cooled generators (S&O), std generators (S&O), 1 aluminum oil pan, forged crankshafts, timing...
|
$ 0 call for prices USD |
8/20/09 |
|
Ford 312/292 Timing Gears & Camshaft Ford 292/312 Interceptor Timing Gears & Camshaft, for reverse rotation. I have the marine block that these parts came out of if you need it, plus some other Ford Marine Interceptor parts. 989-479-6603
|
$ 150 USD |
8/2/09 |
|
|
$ 200 USD |
7/26/09 |
|
Misc. Parts 1937 Chris Craft New Lower Price! Original boat was destroyed, nearly all parts were stripped and stored including engine/trans, prop/rudder, steering assembly, hull/deck fittings, etc. See pics attached or call (864)444-5555 cell for more information.
|
$ 5,000 USD |
7/18/09 |
| |
Gauge Wanted Wanted: Working 12v temp gauge, 2 5/8" dia, presentable condition, 50's style with "temperature" across the lower edge of the face. Curved crystal preferred, not mandatory.
|
$ 0 Neg USD |
7/16/09 |
| |
Rochester 4bbl Carb I removed a Rochester 4 Jet carb from my 283 (28' Connie) and would like to sell it. I replaced it with a new Edelbrock 1409, as I'm more familiar with these. The Rochester was running fine but could probably use a rebuild kit, as I'm not sure how...
|
$ 75 USD |
7/12/09 |
| |
|
$ 500 ea USD |
7/7/09 |
|
Pertonix Ignition Pertonix "Ignitor" series electronic iginition. Fits Chris Craft/Chevy 283 Delco distributors. Never used.
|
$ 75 USD |
4/27/09 |
|
Chris Craft 327Q cooling system - complete complete fresh water cooling system: heat exchanger, thermostat housing, all brackets, tank, & old hoses (houses could use to be replaced) appears to have no cracks or holes.
|
$ 390 USD |
4/7/09 |
|
|
$ 300 USD |
4/7/09 |
|
Chris Craft 327Q 4 Barrel Manifold fresh water cooled, never cracked or repaired, underside has minor surface rust that can be easily removed.
shipping available if buyer agrees to all shipping & packing from 07456
|
$ 340 USD |
4/7/09 |
| |
HYDROMATIK www.adamshydraulics.gr HYDROMATIK www.adamshydraulics.gr
• A2V225
• A2V55
• A2V80
• A2V160
• A2F225
• A2F55
• A2F80
- www.adamshydraulics.gr
• A2F160
• A6VM80
• A7V58
• A6V107
• A4V90
• A4V125
• A4V250
• A4VG125 (BRAND...
|
$ 0 USD |
4/6/09 |
|
|
$ 199 USD |
3/19/09 |
|
| More results: 1 2 3 |
|
|
