TradingDock.org Home
Category:MainEngines, Powertrain, & Parts
Newest Ads in Engines, Powertrain, & Parts(Page 1 of 7)
Title
Price
Date
 
Chris Craft A-120 available
Complete Chris Craft A-120 available. Includes spares. Call Marty Feletto at 916-765-1234.
$ 0 offers USD
8/19/10
Chris Craft ML 145HP engine
Good running ML engine with rebuilt carb, rebuilt distributor, very good water pump(primes and pumps well), tested exhaust manifold, compression is excellent in all cylinders, idles smooth and accelerates sharply. Exhaust elbow is not part of sale...
$ 3,200 USD
6/22/10
 
1963 46' Chris Craft
Two 1 3/8 stainless steel shafts 13'9",two bronze rudders,two 23"19-10 props,one IDEAL windless,one anchor light with horns,four air intakes,two running lights,one 12 volt one mile range spot light,two 431 linclon engines, one 7.5 kw ONAN two...
$ 2,000 for all USD
6/15/10
Chris Craft ML 145HP engine
Excellent running ML engine. Compression is about 117 in all cylinders, rebuilt carb, rebuilt distributor, excellent water pump primes and pumps well, tested exhaust manifold. Idles smooth and accelerates good. We also have a M 130HP engine,...
$ 3,200 USD
6/2/10
FOR SALE Antique-Classic Outboard Motors
Hi, For Sale, MANY antique and classic outboard motors. I am thinning out my collection of Mercurys and others such as a Lockwood Chief and a Martin 100. I do not have any junk motors and most if not all turn over and probally run and are complete....
$ 0 USD
1/26/10
Model K Opposite Rotation
Opposite rotation Model KO, 95-hp. This is the Port Engine in a twin engine Chris-Craft vessel. If you have a twin screw with Ks, you should have this engine for a spare or parts. Removed from vessel 30 years ago, and stored inside. No rust. Motor...
$ 0 Call USD
1/22/10
 
wanted - Sterling heads
Looking for a set of back-up heads for a Sterling Petrel 200HP motor. Need to be the early smooth head style. Please respond to the ad or call Marty at 916-765-1234.
$ 1 USD
12/18/09
Ford 427
Ford 427 Engine complete with Manifolds and Risers. Rebuilt around 300 hrs ago and ran great when I removed it from my 41 Regal Romer. Engine is a right hand (Counter Rotation) Motor and has the pointless ignition upgrade with a MSD System. Motor...
$ 5,000 USD
8/27/09
1957~312~Ford~ Y-Block Interceptor Marine Drive Parts
Offering in a package, or individual parts or pieces is this mid fifties Ford Y Block 312 Interceptor Marine Drive.... Engine was last started aprox. 5/2?/2009. What I believe to be a Dearborn Marine Transmission, went smoothly from forward to...
$ 10 USD
6/23/09
 
1965 Chris Craft KLM Motor
Chris Craft 1955 original equipment KBL motor, triple downdraft carbs, 131 HP, fully rebuilt, great condition. $6000 or best offer. Buyer pays shipping. Bob 510-299-9066.
$ 6,000 OBO USD
12/28/08
 
Reproduction Parts
Reproduction parts for Chris-Craft, Dodge, Gar Wood & Hacker runabouts & utilities. Authentic best-of-show quality hardware since 1979. View catalog at www.californiaclassicboats.com. Printed catalog $6 (refundable with $50 order). Al Schinnerer, ...
$ 0 USD
12/19/07
 
2 Bronze Shafts
2 Bronze Shafts out of our 1968 Chris Craft, they are 1 3/8 in diameter shafts and are 11" 3'. 11 feet 3 inches long. And are in excellent condition. $200.00
$ 200.00 USD
8/23/07
427 Ford 1967
two 427 Ford motors 300 HP, both left turn marine equipment including transmissions 2.5 - 1 ratio, both motors out of large wooden boat, which has since long ago been destroyed. one motor assembled the other apart. the assembled motor the marine...
$ open USD
8/13/07
 
New Scripps Heads & Gaskets
Aluminum 356 T-6 alloy with stainless steel thread inserts Early and late style for 150 series 6-cyl and 300 series 12-cyl. Fully machined $800.00 each or $750.00 each for three or more. New copper head gaskets $75.00 each or $70 each for three or...
$ 800 each Three or more each USD
5/8/07
1941 Chris Craft K
1942 Chris Craft K 95hp motor for rebuilding. Everything is there except the manifold. It comes with Carb, Alternator and Head. Motor has been broken down and is ready for re-build (Motor spun but had low compression in 3 of 6 cylinders).
$ 500 USD
4/13/07
 
15HP 4-cycle Mercury outboard
2002 Mercury 4-cycle 15hp outboard - used one season, still in factory shipping carton with hose and tank. This motor is in like-new condition.
$ 2,000 USD
3/31/10
M Chris Craft engine
A very good condition M motor. 116-119 compression in all cylinders. Nicely detailed. 12 volt system, 6 volt also available. Carb and dist. rebuilt. The exhaust elbow is NOT part of this sale. Also we have a ML engine for $3200, see the ad in the...
$ 2,900 USD
3/24/10
Chris Craft ML 145HP engine
Good running ML engine, nicely detailed. Good compression in all cylinders, rebuilt carb, water pump primes and pumps good, distributor was cleaned and tested. Original 6 volt system but could be changed to 12 volt. Solid state ignition, and full...
$ 3,200 USD
3/10/10
 
Chris-Craft 307 Engine
Chris-Craft,engine 307Q, 200hp, model 3070 L, No. 103850, with exhaust manifolds and transmission, engine probably needs rebuild. $500. MN, 218-343-3059
$ 500 USD
3/1/10
 
K Engine Parts -Used
Rochester carbs (3) for KBL Cam, crank, head, valves, manifold, covers, oil pump, other parts. Call 765-318-6775 or email bonnie@mjestell.com for information and offer a price. Great deal for an engine guy. I can email pictures if needed. These...
$ 0 USD
2/25/10
Horn Ring
This is a horn ring with for a Century Coronado that fits a 4 spoke wheel and was used in the late 50's and early 60's. The ring has no cracks or bends. The chrome is good with minor pitting. Call 386-785-8911
$ 150 USD
2/22/10
 
427 Ford/Chris Craft
I am removing a pair of working Ford 427 Engines and associated running gear (heat exchangers, transmissions, carbs, etc), from a 1967 40' Chris Craft. One engine is standard rotation, and the other counter-rotates. While both engines run...
$ 4,000 USD
12/9/09
 
chris craft 283 engines namplates
I'm looking for 2 chris-craft 283 engine namplates perfect condition only . Many thanks . Jean .
$ 100 USD
12/8/09
Complete Closed Cooling System for a CC M or K Engine
Excellent Used Sen-Dure Closed Cooling System for a Chris Craft M or K engine Model # 4CR-281P5J, SN 148353. 4 inch diameter, copper/bronze exchanger tubes and outer shell, 28 inches long, single pass. Components include 28” heat exchanger...
$ 950 USD
12/7/09
TWIN MCL Engines
Twin Chris Craft MCL engines complete (still in boat) engines turn freely and were running when boat was put in storage in 99. If you are interested in these rare 175hp twin carburator engines - one is opposite rotation you should call as quick as...
$ 2,500 pair USD
11/21/09